Building and Construction Trades Course
The flagship trades programme for artisans, youth and job seekers. Learners move through masonry, steel fixing, formwork and concrete works on live RailSite sites, building real elements to specification and learning the quality and…
- Course ID 020
- 4 weeks (20 training days)
- Nairobi
- Beginner
- Certificate
Course Overview
The flagship trades programme for artisans, youth and job seekers. Learners move through masonry, steel fixing, formwork and concrete works on live RailSite sites, building real elements to specification and learning the quality and safety habits that make a trade worker employable.
TARGET AUDIENCE
■ Artisans and apprentices
■ Youth and job seekers
■ Casual labourers seeking skilled status
■ Contractors upgrading their gangs
- Duration
- 4 weeks (20 training days)
- Course fee
- KES 369,000
- Venue
- Nairobi
Course Requirements
Participants should have:
- Ability to read, write and perform basic arithmetic
- Good physical fitness for heavy manual work and work at height
- Own safety boots and overalls
- No prior trade experience required; casual site experience is an advantage
Course Objectives
By the end of this course, participants will be able to:
- Read drawings and set out simple building elements correctly.
- Lay blocks and stone to line, level and plumb.
- Cut, bend and fix reinforcement to schedule and cover requirements.
- Build, prop and strike formwork safely, and place, compact and cure concrete properly.
- PERSONAL IMPACT
- Gain recognised skill in masonry, steel fixing, formwork and concrete
- Qualify for better-paid skilled work
- Learn to price and organise labour-only jobs
- COURSE OUTCOME
- Graduates are job-ready general construction artisans who can work in a masonry, steel fixing, formwork or concrete gang. They hold a trade-test record, know basic site safety, and understand how to price and manage labour-only work.
Course Modules
Module 1 COURSE OUTCOME Graduates are job-ready general construction artisans who can work in a masonry, steel fixing, formwork or concrete gang. They hold a trade-test record, know basic site safety, and understand how to price and manage labour-only work.
- Site induction
- PPE
- Tool identification and care
- Construction materials overview
Practical exercise: Complete a site induction, identify tools and materials by sight and demonstrate correct PPE use
Module 2 Drawings and Basic Setting Out
- Reading plans and sections
- Measuring and marking
- Squaring with the 3-4-5 method
- Levels with a water level and spirit level
Practical exercise: Read a sample plan and set out a rectangular foundation using the 3-4-5 method and a spirit level
Module 3 Mortar and Concrete Mixing
- ■ Mix ratios and batching
- ■ Hand and machine mixing
- ■ Workability
- ■ Storage and wastage control
Practical exercise: Batch and mix mortar and concrete to given ratios and compare the workability of two mixes
Module 4 Foundation Works
- ■ Excavation and trench checks
- ■ Blinding
- ■ Strip footings and bases
- ■ Damp-proofing introduction
Practical exercise: Excavate and check a trench to line and depth, then place blinding and set out a footing
Module 5 Masonry I
- ■ Block and stone types
- ■ Bonding patterns
- ■ Tools and techniques
- ■ Building corners and leads
Practical exercise: Build a corner lead in a chosen bond pattern and check it for plumb and level
Module 6 Masonry II
- ■ Walls to line and level
- ■ Door and window openings
- ■ Lintels and reinforcement in walls
- ■ Jointing
Practical exercise: Build a short wall with a door opening and lintel to line and level
Module 7 Masonry Practical
- ■ Build a wall with openings
- ■ Plumb and level checks
- ■ Productivity and wastage
Practical exercise: Build a wall with openings to drawing and record productivity and wastage
Module 8 Reinforcement Basics
- ■ Steel grades and sizes
- ■ Reading bar bending schedules
- ■ Cutting and bending
- ■ Safe handling
Practical exercise: Read a bar bending schedule, then cut and bend a set of bars to the required shapes
Module 9 Steel Fixing I
- ■ Footing mats and column cages
- ■ Spacers and cover
- ■ Laps and anchorage
- ■ Binding techniques
Practical exercise: Fix a footing mat and a column cage to drawing with correct cover and laps
Module 10 Steel Fixing II
- ■ Beams, slabs, stairs and retaining walls
- ■ Fixing sequence
- ■ Inspection before pour
Practical exercise: Fix reinforcement for a beam and slab panel and pass a pre-pour inspection
Module 11 Formwork Principles
- ■ Materials and systems
- ■ Loads on formwork
- ■ Props and bracing
- ■ Striking times
Practical exercise: Inspect a sample formwork assembly and identify load, bracing and striking-time faults
Module 12 Formwork I
- ■ Footing and column formwork
- ■ Alignment and levelling
- ■ Release agents
Practical exercise: Build and align formwork for a footing and a column and check it for level and plumb
Module 13 Formwork II and Scaffolding
- ■ Beam, slab and stair formwork
- ■ Access scaffolding basics
- ■ Safe working at height
Practical exercise: Build beam and slab formwork and erect a small access scaffold safely
Module 14 Concrete Placing
- ■ Batching and transport
- ■ Placing and compaction
- ■ Vibrator use
- ■ Avoiding segregation
Practical exercise: Place and compact a concrete sample in a mould using correct vibration technique
Module 15 Finishing and Curing
- ■ Screeding and floating
- ■ Construction joints
- ■ Curing methods
- ■ Early defects and repairs
Practical exercise: Screed, float and cure a concrete panel, then repair a deliberately planted defect
Module 16 Slabs and Stairs Practical
- ■ Complete a slab panel and a short flight of stairs from formwork to pour
Practical exercise: Complete a slab panel and a short flight of stairs from formwork to pour as a team
Module 17 Quality and Defects
- ■ Common defects (honeycombing, cracks, misalignment)
- ■ Tolerances
- ■ Inspection checklists
- ■ Rectification
Practical exercise: Inspect a defective sample element against a checklist and propose rectification
Module 18 Quantities and Productivity
- ■ Estimating materials for walls, concrete and steel
- ■ Wastage allowances
- ■ Labour rates and output
Practical exercise: Estimate the materials and labour for a small wall and slab from a drawing
Module 19 Integrated Practical Project
- ■ Team build of a small structure combining all trades
Practical exercise: Deliver a team-built small structure to drawing, programme and quality standards
Module 20 Trade Test and Job Readiness
- ■ Practical trade test
- ■ Labour-only subcontracting basics
- ■ CVs, tool kits and finding work
- ■ Certification
Practical exercise: ■ Practical trade test ■ Labour-only subcontracting basics ■ CVs, tool kits and finding work ■ Certification
Course Administration Details
Methodology
Training is hands-on. Most of the time is spent doing the work on our training site and on live projects, guided by experienced professionals. Short classroom sessions cover drawings, materials and safety. All sessions are in English.Certificate
Participants who complete the course and pass the final assessment receive a RailSite Fieldwork Academy certificate.Training Venue
Training takes place in Nairobi, at our training site and on active project sites. The course fee covers tuition and training materials. Participants cover their own transport, meals and other personal expenses.Group and Tailor-Made Training
We can run this course for your team, company or community group, at a date and location that suits you. Call or message us to plan it.Payment
Pay the course fee on or before the start date. Call +254 721 720 987 or email info@railsitebld.com for payment details.Intakes
Upcoming intake dates
Want this course for your team or group? Request group training.
